Auto Maintenance & Repairs Maintenance Driving & Safety Car Stereo & Audio Aviation Autos, Motorcycles & Planes WonderHowTo

Car Mods Features

iOS 18 Tips, Tricks, How-Tos, News

How To: Move breathers with a scuba mod on a Toyota FJ Cruiser

Check out this automotive video tutorial to see how to relocate breathers on a Toyota FJ Cruiser. If you own a Toyota FJ Cruiser and you plan on getting it wet, you're going to be doing a scuba mod, which is nothing more than relocating the breathers up to a higher location. In this video, you will see how to relocate the breathers to your vehicle's gas fill area, to keep them neat and tidy and out of the way. This step-by-step presentation will get you to move those breathers with the scuba ...

How To: Remove Ninja 650R motorcycle fairings

This is an instructional video on how to remove the fairings from my Ninja 650R. The fairings are essentially the Ninja motorcycle's plastic body. Removing these can allow you to put a custom body on, or make modifications under the fairings. Pretty soon, your Ninja 650R will be the best motorcycle around!

How To: Install a water cooled head on a DIO stroker cylinder

In this scooter engine customization tutorial you will learn how to install a 107 SEF cylinder with water cooled head in a Honda Elite DIO scooter. Modifying the stroker cylinder is a major modification so you should have some mechanical experience. This is part of the process of installing a stroker cylinder kit in a Honda Elite DIO scooter.

How To: Setup your bluetooth in your 2010 Ford Fusion

One of the great features in cars nowadays, is the ability ti connect it with your cell phone. With states accepting laws about driving and cell phone use, this feature can be a much needed addition to your vehicle. In this quick and easy tutorial, you'll find out how to setup your bluetooth phone with a 2010 Ford Fusion. Enjoy!

News: Segway + Skateboard + Tank Threads = SICK Off-Road Shredder

I don't know how else to say it. In a word, the DTV (Dual Tracked Vehicle) Shredder from BPG Werk is just plain awesome. "Built as a first response modular platform to better equip the soldier to deal with crisis situations, the DTV is a new class of vehicle that can handle any terrain at high speed. It’s low center of gravity and rugged design make it ideal for a wide variety of applications including, reconnaissance, rescue/recovery, mobile surveillance/offensive platform, med-evac, rapid r...

How To: Use Plasti Dip Coat to Black Out Car Emblems

Plasti Dip coating is a rubber like coating that can be dipped or sprayed on. I first remember the coating available as a dip years ago. It was first introduced as a coating used to dip tool handles in to provide a grip. However, since then, the coating has became available in a spray can. It has also became popular on car parts, such as wheels, emblems, and even entire cars.

How To: Spray primer sealer and base coat paint on an automobile fender

If you're painting your auto yourself, you might need a little help if you've never done it before, especially when it comes to the primer sealer and apply your first base coat of paint. This video will show you how to do just that. An OEM fender was already prepped by sanding with 500 grit sandpaper on a DA with a soft pad and surfing the edges with a maroon scuff pad.

How To: Install a car remote starter

A series of videos that help show just how tough it can be to install a remote car starter. Unless your an electrician or a technician, this complex job can result in a variety of electronic failures in your car including prevention of actually getting into your car as well as prevent you from driving home.

How To: Custom paint a car

Doug Jenkins, will not only show you how to maintain your car but also how to completely restore and renew its paint job. You'll learn how to scuff off old, dry paint, apply new paint and even fix blemished in the paint job as your cars becomes like new before your eyes.

How To: Paint an Engine Block

Tired of your old engine looking... not so good? Clean it up and enhance the overall look with a simple paint job! In this episode, we show you how to paint your engine block, costing you only a few bucks and about an hour or two of your time!

How To: Vent Your Hood for Only $3

The guys at Poor Man Mods show you how to vent your hood to reduce engine bay temperatures, which can lead to lower intake temperatures and protection to components in your engine bay. To do this, they just take a few coupler nuts and screw them onto the studs on the hood where the hinge is. Doing so, they create about a 1 inch gap in-between the hinge and the hood itself, which raises the rear of the hood up, allowing hot air to escape. Near the turbo, this help reduce engine bay temps by 12...

How To: Fix Plastic Car Bumpers

If you are wanting to learn how to perform small repairs to your car, then plastic repair is something you need to learn how to do. Cars are using more plastic now than ever before. With car required to increase fuel mileage, I don't see the use of plastic going away.

How To: Remove old car window tint

If you've decided that you want to scrape the tint off of your vehicle's windows, you're going to want to watch this video tutorial. In order to strip the tin from the windows, you'll need a single-edged razor, a cleaning rag and an all-purpose spray cleaner. Scrape at the corner of the tint film with the razor and peel it off. Spray the cleaner on the glass , then put back the film onto your automobile's window. Wait about twenty minutes and pull it of again. Now, spray off more cleaner and ...

How To: Roll car fenders

Changing your suspension, ride height or tire size can cause problems with fenders and fender walls rubbing on your tires. This is dangerous and annoying. Watch this video to learn how to roll your fenders (guard rolling) so your tires don't rub.

How To: Convert your motorcycle to electric power

This how-to video shows how to build your own electric motorcycle; a nice way to change from gas to batteries to save the environment. There is lots of welding, but the key to welding is dropping the piece and checking if it stays together. Spindles and sprockets must align and then you are set. Check out this video customization tutorial and learn how to convert a motorcycle to electric power.